Stihl 041 Serial # 05816491 and up Chainsaw Parts - Suitable Replacement

STIHL BAR NUT, REPLACES STIHL PART # 0000-955-0801, 8MM ID X 19MM BAR NUT.
QUANTITY 1 NUT.

STIHL REPLACEMENT STARTER RING. REPLACES STIHL PART # 0000-961-5115
NOTE: NOT ALL 041 SAWS USED THIS STYLE, VERIFY WHAT YOUR SAW HAS BEFORE ORDERING

Suitable Replacement Gasket

HIGH QUALITY IMPULSE LINE TO REPLACE STIHL PART # 0000-930-2803 3.1X5.7X120MM. FOR STIHL CHAINSAWS 041, 041AV, 041AVFB, 041 SN 05816491 and UP, 041 FARM BOSS

A HIGH QUALITY REPLACEMENT FUEL LINE FOR STIHL 041 SAWS, THIS FUEL LINE GOES FROM THE FUEL TANK ADAPPTER TO THE CARB 135MM

STIHL WRIST PIN BEARING, REPLACES 9512-003-2340 , HIGH QUALITY CAGE NEEDLE BEARING DESIGNED FOR LONG HOURS OF HEAVY USE. BEARING SPECS: 10X14X13,  NOTE: STIHL 044, 044 MAGNUM MODELS,  THIS WRIST PIN BEARING IS FOR A 10MM WRIST PIN. IF YOU HAVE A 12MM WRIST PIN  [NEWER MODELS] THEN YOU WILL NEED PART # 9512-003-3061

HIGH QUALITY REPLACEMENT STIHL 041 INNER BAR PLATE, REPLACE STIHL PART # 1113-664-1001

HIGH QUALITY REPLACEMENT STIHL 041 OUTER BAR PLATE, REPLACE STIHL PART # 1113-664-1100

A HIGH QUALITY REPLACEMENT SWITCH FOR STIHL CHAIN SAWS THAT USE STIHL PART # 1110-430-0202

Suitable Replacement Chainsaw Air Filter

Suitable Replacement Starter Handle & Rope

Suitable Carb Rebuild Kit.

Suitable Replacement Gaskets

Suitable Tune-Up Kit

high quality replacement bar plates for these stihl part numbers 1113-664-1001 and 1113-664-1100

Suitable Replacement Fuel Line And Fuel Filter.

TOP SAW TOOL IS A MUST FOR YOUR SAW IN THE WOODS OR AROUND THE FARM NOTE; SOCKET END DESIGNED FOR 3/4"-[19MM] SPARK PLUS, BAR NUTS AND 13MM-[1/2"] BAR NUTS, SCREW DRIVER AND OTHER GREAT TOOLS FOLD UP IN A DURABLE NYLON HOLDER.

A HIGH QUALITY REPLACEMENT FLYWHEEL PULLER FOR STIHL CHAIN SAWS, PULLER HAS BOTH LARGE AND SMALL THREAD SIZES FOR STIHL SAWS.

High quality replacement sprocket and bearing.

STIHL FRICTION STYLE STARTER KIT: INCLUDES THESE PARTS: STARTER RING, STARTER DOGS AND FIBER WASHERS..
NOTE: NOT ALL 041 SAWS USED THIS STYLE, VERIFY WHAT YOUR SAW HAS BEFORE ORDERING

Suitable Replacement Chainsaw Bar & Chain

Suitable Replacement Piston Kit.

STIHL 041, 041AV, 041FB, 041 FARMBOSS, 041 SUPER, 041G REPLACEMENT IGNITION POINTS AND CONDENSER
REPLACES STIHL PART # 1115-404-3400, 1115-400-2000

Suitable 16" Replacement Bar And Chain.

Suitable 18" Replacement Bar And Chain.

Suitable 20" Replacement Bar And Chain.

Suitable 20" Replacement Bar and Chain

A HIGH QUALITY REPLACEMENT IGNITION COIL FOR POINT IGNITION SYSTEM ONLY, WILL NOT WORK ON OR REPLACE ELECTRONIC IGNITION COILS. REPLACES STIHL PART # 1115-404-3200

Suitable 20" Replacement Bar And Chain.

Suitable Replacement Bar And Chain Combo

Suitable Replacement Bar And Chain Combo

Suitable 24" Replacement Bar And Chain.

Suitable Replacement Bar And Chain Combo

Suitable 25" Replacement Bar And Chain.

STIHL 041, 041AV, 041FB, 041 FARMBOSS, 041 SUPER, 041G REPLACEMENT IGNITION COIL, POINTS AND CONDENSER
REPLACES STIHL PART # 1115-400-2000, 1115-404-3400, 1115-404-3200
NOTE: SOME STIHL 041 SAWS WERE ELECTRONIC IGNITION, VERIFY WHAT YOUR SAW HAS. NO PARTS AVILABLE FOR ELECTRONIC IGNITION SAWS

Suitable Replacement Carburetor

Suitable 28" Replacement Bar And Chain.

Suitable 32" Replacement Bar And Chain.

Suitable 28" Replacement Bar And Chain.

Suitable 42" Replacement Bar And Chain.

Suitable 42" Replacement Bar And Chain.

THIS IS A LIL RED BARN PERFORMANCE SAW SUPPLY BAR AND CHAIN. Other pictures will not delete off system. 42" 3/8 pitch, .063 gauge, 135 drive links. This high-quality bar and skip tooth chain combo fits the following chainsaw models: Stihl 028, 028 Super, 028WB, 028AV, 028 Wood Boss, 029, 030, 031, 032, 034, 034 Super, 034AV, 036, 036P, 036Pro, 036QS, 040, 038, 038AV, 038 Super, 038 Magnum, 039, 041, 042, 044, 044 Magnum, 044M, 045, 046, 046 Magnum, 046M, 048, 056, 056 Super, 056 Magnum, 064, 066, 066 Magnum, MS 310, MS 311, MS 340, MS 360, MS 360c, MS 360 Pro, MS 360QS, MS 361, MS 361 C-B, MS 361 C-Q, MS 362, MS 362 C-Q, MS 390, MS 391, MS 440, MS 440 Magnum, MS 441, MS 441 C, MS 460, MS 460 Magnum, MS 650, MS 660, MS 660M, MS 660 Magnum.