|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 OEM EXHAUST STUDS, NUTS & GASKET, PART # 24-072-24-S, ORIGINAL KOHLER OEM EXHAUST STUDS, REPLACEMENT EXHAUST GASKET PART # 24-041-49-S, 2 REPLACEMENT NUTS 25-100-52-S
|
2 VALVE COVER ORING FIT KOHLERREPLACES KOHLER PART # 24-153-30-S
NOTE: THESE VALVE COVER ORING GASKET ARE NOT MADE IN TAIWAN OR CHINA
|
KOHLER CRANKCASE BREATHER GASKET FITS KOHLER COMANDE V TWIN ENGINES
NOTE: THIS HIGH QUALITY MADE GASKET IS NOT MADE IN TAIWAN OR CHINAREPLACES THE KOHLER PART NUMBERS: 24-041-51-S 24-041-64-S 24-041-67-S
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 BRAND NEW KOHLER VALVE SEALS PART # 25-032-14-S NOTE: THESE HIGH QUALITY MADE VALVE SEALS ARE NOT MADE IN TAIWAN OR CHINA SHIPS FROM USA WITH A TRACKING NUMBER AND FREE SHIPPING TO THE 50 STATES
REPLACES KOHLER PART NUMBER: 25-032-14-S, 2503214, 25 032 14 S, 25 032 14 THESE VALVE SEALS ARE OIL AND HEAT RESISTANT AND RESIST SWELLING
|
2 KOHLER CRANKSHAFT SEALS, FLYWHEEL SIDE & PTO SIDE NOTE: THESE HIGH QUALITY MADE CRANKSHAFT SEALS ARE NOT MADE IN TAIWAN OR CHINA
REPLACES THESE KOHLER PART NUMBERS: 1- 24 032 01, 24 032 19 FRONT FLYWHEEL CRANKSHAFT SEAL 1- 52 032 08, 25 032 06 REAR PTO CRANKSHAFT SEALS
|
4 OEM KOHLER PUSH RODS PART # 24-411-05-S, ORIGINAL KOHLER OEM PUSH RODS
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 BRAND NEW KOHLER VALVE SEALS PART # 25-032-14-S NOTE: THESE HIGH QUALITY MADE VALVE SEALS ARE NOT MADE IN TAIWAN OR CHINA SHIPS FROM USA WITH A TRACKING NUMBER AND FREE SHIPPING TO THE 50 STATES
REPLACES KOHLER PART NUMBER: 25-032-14-S, 2503214, 25 032 14 S, 25 032 14 THESE VALVE SEALS ARE OIL AND HEAT RESISTANT AND RESIST SWELLING
|
4 BRAND NEW OEM KOHLER CYLINDER HEAD STUDS PART # 24-072-09-S
|
1 NEW STATOR 237878-S FITS KOHLER K241 K301 K321 K341 K361 M10 M12 M14 M16 M18 M20 KT17 KT19 MV20 MV18 MV16 CH18 CH20 CH22 CH23 CH25 CH26 CV18 CV20 CV22 CV23 CV25 CV27
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OEMKOHLER VALVE TRAIN KIT 24-755-66-S
|
2 SETS OF HIGH QUALITY PISTON RINGS REPLACES KOHLER 24-108-22-S, 24 108 22, 2410822, THESE ARE STANDARD PISTON RINGS, 1.2MM THICK TOP RING. 77MM DIAMETER. WILL FIT THE ENGINES LISTED BELOW, BE SURE TO CHECK YOU MODEL AND SPEC TO ENSURE THESE ARE THE CORRECT RINGS FOR YOUR KOHLER ENGINE. BRAND NEW THESE ARE HIGH QUALITY RINGS THAT ARE NOT MADE IN CHINA OR TAIWAN
YOU WILL RECEIVE 2 SETS OF PISTONS RINGS AS PICTURED!!!
FITS THE FOLLOWING KOHLER COMMAND SERIES ENGINES. - CH20, CV20
- CH18-22
- CH620-641
- CV18-22
- CV620-640
|
2 SETS OF HIGH QUALITY PISTON RINGS REPLACES KOHLER 24-108-22-S, 24 108 22, 2410822, THESE ARE STANDARD PISTON RINGS, 1.2MM THICK TOP RING. 77MM DIAMETER. WILL FIT THE ENGINES LISTED BELOW, BE SURE TO CHECK YOU MODEL AND SPEC TO ENSURE THESE ARE THE CORRECT RINGS FOR YOUR KOHLER ENGINE. BRAND NEW THESE ARE HIGH QUALITY RINGS THAT ARE NOT MADE IN CHINA OR TAIWAN
YOU WILL RECEIVE 2 SETS OF PISTONS RINGS AS PICTURED!!!
FITS THE FOLLOWING KOHLER COMMAND SERIES ENGINES. - CH20, CV20
- CH18-22
- CH620-641
- CV18-22
- CV620-640
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 SETS OF HIGH QUALITY PISTON RINGS REPLACES KOHLER 24-108-22-S-20, 24 108 22-20, 2410822-20, THESE ARE OVERSIZE .5MM/.020" PISTON RINGS, 77.5MM DIAMETER. WILL FIT THE ENGINES LISTED BELOW, BE SURE TO CHECK YOU MODEL AND SPEC TO ENSURE THESE ARE THE CORRECT RINGS FOR YOUR KOHLER ENGINE. BRAND NEW THESE ARE HIGH QUALITY RINGS THAT ARE NOT MADE IN CHINA OR TAIWAN
YOU WILL RECEIVE 2 SETS OF PISTONS RINGS AS PICTURED!!!
FITS THE FOLLOWING KOHLER COMMAND SERIES ENGINES. - CH20, CV20
- CH18-22
- CH620-641
- CV18-22
- CV620-640
|
2 SETS OF HIGH QUALITY PISTON RINGS REPLACES KOHLER 24-108-23-S+.008", 24 108 23-.008", 2410822-.008", THESE ARE OVERSIZE .008" PISTON RINGS, 77MM + .008" DIAMETER. THE RINGS CAN BE CUSTOM FILED TO GET DESIRED PISTON RING GAP CLEARANCE. WILL FIT THE ENGINES LISTED BELOW, BE SURE TO CHECK YOU MODEL AND SPEC TO ENSURE THESE ARE THE CORRECT RINGS FOR YOUR KOHLER ENGINE. BRAND NEW THESE ARE HIGH QUALITY RINGS THAT ARE NOT MADE IN CHINA OR TAIWAN
YOU WILL RECEIVE 2 SETS OF PISTONS RINGS AS PICTURED!!!
FITS THE FOLLOWING KOHLER COMMAND SERIES ENGINES. - CH20, CV20
- CH18-22
- CH620-641
- CV18-22
- CV620-640
|
INTAKE & EXHAUST VALVES WITH VALVE SEALS THESE HIGH QUALITY MADE VALVES THAT ARE NOT MADE IN TAIWAN OR CHINA
REPLACES THESE KOHLER PART NUMBERS 2- 24-017-01-S INTAKE VALVE 2- 24-016-01-S OR 32-016-01-S EXHAUST VALVE 2- 24-032-05-S OR 66-032-05-S VALVE SEAL
|
|
|
|
|
|
|
|
|
|
|
2 STANDARD CONNECTING RODS KOHLER CV18, CV20 CV22 CV25 CV620 CV740 CV750 CV23, CH18, CH20, CH22, CH23, CH25, CH730, CH740, ECH749, ECV749
|
|
|
|
|
|
4 OEM KOHLER HYDRAULIC LIFTERS 25-351-11-S WITH KOHLER LIFTER LUBE
|
1 NEW STATOR 237878-S FITS KOHLER K241 K301 K321 K341 K361 M10 M12 M14 M16 M18 M20 KT17 KT19 MV20 MV18 MV16 CH18 CH20 CH22 CH23 CH25 CH26 CV18 CV20 CV22 CV23 CV25 CV27
|
2 OEM CONNECTING RODS FITS KOHLER PART NUMBER # 25-067-04-S
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TWO 24-067-05-S OEM KOHLER .010" UNDERSIZED CONNECTING ROD
|
CYLINDER HEAD GASKET KIT WITH CRANKSHAFT SEALS AND SEALER FOR SUMP/OIL PAN, AND 2 SETS OF HIGH QUALITY PISTON RINGS REPLACES KOHLER 24-108-22-S, 24 108 22, 2410822, THESE ARE STANDARD PISTON RINGS, 1.2MM THICK TOP RING. 77MM DIAMETER. WILL FIT THE ENGINES LISTED BELOW, BE SURE TO CHECK YOU MODEL AND SPEC TO ENSURE THESE ARE THE CORRECT RINGS FOR YOUR KOHLER ENGINE. BRAND NEW THESE ARE HIGH QUALITY RINGS THAT ARE NOT MADE IN CHINA OR TAIWAN
YOU WILL RECEIVE 2 SETS OF PISTONS RINGS AS PICTURED!!!
FITS THE FOLLOWING KOHLER COMMAND SERIES ENGINES. - CH20, CV20
- CH18-22
- CH620-641
- CV18-22
- CV620-640
|
2 BRAND NEW STANDARD PISTONS WITH RINGS THAT FIT KOHLER CH18, CH20 CH22 CV18 CV20 CV22, CH620, CH630, CH640, CH641, CV625 77MM BORE, 25-874-46-S NOTE: THESE HIGH QUALITY MADE PISTONS ARE NOT MADE IN TAIWAN OR CHINA BE SURE TO VERIFY YOUR KOHLER ENGINE THAT IT HAS A 77MM BORE BEFORE ORDERING
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 BRAND NEW .010" .25MM OVERSIZE PISTONS WITH RINGS THAT FIT KOHLER CH18, CH20 CH22 CV18 CV20 CV22, CH620, CH630, CH640, CH641, CV625 77.25MM, 25-874-46-S-.25MM .010" NOTE: THESE HIGH QUALITY MADE PISTONS ARE NOT MADE IN TAIWAN OR CHINA BE SURE TO VERIFY YOUR KOHLER ENGINE THAT IT HAS A 77MM BORE BEFORE ORDERING
|
2 BRAND NEW .030" .75MM OVERSIZE PISTONS WITH RINGS THAT FIT KOHLER CH18, CH20 CH22 CV18 CV20 CV22, CH620, CH630, CH640, CH641, CV625 77MM BORE, 25-874-46-S-30 NOTE: THESE HIGH QUALITY MADE PISTONS ARE NOT MADE IN TAIWAN OR CHINA
BE SURE TO VERIFY YOUR KOHLER ENGINE THAT IT HAS A 77MM BORE BEFORE ORDERING
|
2 BRAND NEW .020" .50MM OVERSIZE PISTONS WITH RINGS THAT FIT KOHLER CH18, CH20 CH22 CV18 CV20 CV22, CH620, CH630, CH640, CH641, CV625 77.50MM, 25-874-46-S-.50MM NOTE: THESE HIGH QUALITY MADE PISTONS ARE NOT MADE IN TAIWAN OR CHINA BE SURE TO VERIFY YOUR KOHLER ENGINE THAT IT HAS A 77MM BORE BEFORE ORDERING
|
|
|
