You are here: Home > Parts & Tools > 4-Stroke Engines > Kohler > K Series > K241
Sort By:
Page of 2
1 POINTS COVER GROMMET FITS KOHLER K91 K161 K181 K241 K301 K321 K341 K361 K432 K532 K582 1 CAMSHAFT SHIM .010" FITS KOHLER K241, K301, K321, K341 K361 M10, M12, M14, M16 PART # 275067-S 1 CAMSHAFT SHIM .005" FITS KOHLER K241, K301, K321, K341 K361, M10, M12, M14, M16 PART # 275066-S
IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 47-755-20-S
NOTE: THESE HIGH QUALITY MADE MAGNETO COIL IS NOT MADE IN CHINA
 		GOVENOR SPRINGS REPLACES KOHLER PART # 235496-S, K281, K301, K321, K341, K361, M10, M12, M14, M16
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA

 		GOVENOR SPRINGS REPLACES KOHLER PART # 235496-S, K281, K301, K321, K341, K361, M10, M12, M14, M16
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA
NEW CARBURETOR MOUNTING GASKET SET FITS KOHLER K582 K532 K482 M18 M20 KT17 KT19 2 POINTS COVER GROMMET FITS KOHLER K91 K161 K181 K241 K301 K321 K341 K361 K432 K532 K582 1 NEW CYLINDER HEAD GASKET FITS KOHLER K241, K301, K321, M10, M12, M14 47-041-15


IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 47-755-20-S
NOTE: THESE HIGH QUALITY MADE MAGNETO COIL IS NOT MADE IN CHINA
 		1 NEW CYLINDER HEAD GASKET FITS KOHLER K241, K301, K321, M10, M12, M14 REPLACES KOHLER PART # 47-041-15, 4704115, 47-041-15-S
NOTE: THESE HIGH QUALITY MADE CYLINDER HEAD GASKET IS NOT MADE IN TAIWAN OR CHINA
KOHLER OEM 235603-S THROTTLE / CHOKE CABLE SPEED CLIP CARBURETOR GASKET / SPACER FITS KOHLER CAST IRON K241, K341 ENGINES 47-049-01-S GOVENOR SPRINGS REPLACES KOHLER PART # 47-091-01-S, K281, K301, K321, K341, K361, M10, M12, M14, M16
IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 47-755-20-S
NOTE: THESE HIGH QUALITY MADE MAGNETO COIL IS NOT MADE IN CHINA
 		A BRAND NEW GASKET & SPACER FIR KOHLER K SERIES 10-16HP, K281, K301, K321, K341,M10, M12, M14,M16, M18, M20, KT17, KT19 REPLACES KOHLER PART # 47-049-01-S, THIS ITEM IS NOT MADE IN CHINA

GOVENOR SPRINGS REPLACES KOHLER PART # 47-091-01-S, K281, K301, K321, K341, K361, M10, M12, M14, M16
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
PLEASE NOTE, NOT ALL OF THE KPHLER MODELS LISTED USED THIS GOVENOR SPRING, PLEASE CONFIRM PART 3 AND COMPARE THE PICTURE WITH YOUR OLD GOVENOR SPRING
GOVENOR SPRINGS REPLACES KOHLER PART # 235496-S, K281, K301, K321, K341, K361 AIR FILTER & PRE FILTER FITS KOHLER K241 K301 K321 K181, M8, 235116-S, NEW BREATHER HOSE FITS KOHLER K321, K341 ENGINES REPLACES PART # 47-326-01-S
GOVENOR SPRINGS REPLACES KOHLER PART # 235496-S, K281, K301, K321, K341, K361
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
PLEASE NOTE, NOT ALL OF THE KPHLER MODELS LISTED USED THIS GOVENOR SPRING, PLEASE CONFIRM PART 3 AND COMPARE THE PICTURE WITH YOUR OLD GOVENOR SPRING

NEW AIR FILTER & PRE CLEANER FITS KOHLER K181, K241, K301, K321 THAT USE THIS AIR FILTER
SHIPS FROM USA WITH A TRACKING NUMBER

Measurements on air filter: OD = 6" ID = 4 7/8" HEIGHT = 1 7/8"
 		BREATHER HOSE 47-326-01-S, FITS KOHLER K241, K301, K321, K341 ENGINES, NEW
SHIPS FROM USA WITH A TRACKING NUMBER
THIS BREATHER TUBE IS NOT MADE IN TAIWAN OR CHINA
SHIPS PROUDLY FROM USA WITH A TRACKING NUMBER
1 NEW FUEL PUMP DIAPHRAGM FITS KOHLER K181 K241 K301 K321 K341 M10 M12 M14 M16 IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 4775520 POINTS & CONDENSER KIT FIT KOHLER K181 K241 K301 K321 K341. 47 150 03, 230722
THIS FUEL PUMP DIAPHRAGM IS FOR ALL METAL FUEL PUMPS THAT ARE USED ON KOHLER K91, K141, K161, K171, K181, K241, K301, K321, K341, K361, KT17, K19, K482, K532, K582, M8, M10, M12, M14, M16, M18, M20, MV16, MV18, MMV20
THE FUEL PUMP MOUNTING HOLES ARE 1 1/4" APART CENTER TO CENTEDIAPHRAGM IS 3 LAYERS, HAS FUEL PUMP RETURN SPRING & NEW FUEL PUMP GASKET
IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 47-755-20-S
NOTE: THESE HIGH QUALITY MADE MAGNETO COIL IS NOT MADE IN CHINA
 		POINTS & CONDENSER KIT FIT KOHLER K181 K241 K301 K321 K341 K361, K482, K532, K582, REPLACES KOHLER PART NUMBERS 47-150-03, 230722
NOTE: THIS HIGH QUALITY REPLACEMENT KOHLER POINTS AND CONDENSER SET FITS BATTERY IGNITION ONLY KOHLER ENGINES. NEVER JUST REPLACE POINTS WITH OUT REPLACING THE CONDENSER, A BAD CONDENSER CAN CAUSE THE POINTS TO FAIL PREMATURLY
2 VALVE GUIDES 235007-S FITS KOHLER K241 K301 K321 K341 K361 K432 K532 K582 NEW CARBURETOR MOUNTING GASKET SET WITH SCREWS FITS KOHLER K582 K532 K482 M18 M20 KT17 KT19 K241 K301, K321, K341, K361, M10, M12, M14, M16 POINTS & CONDENSER KIT WITH SPARK PLUG FIT KOHLER K181 K241 K301 K321 K341. 47 150 03, 230722
2 VALVE GUIDES FITS KOHLER K241, K301, K321, K341, M10, M12, M14, M16, 10HP, 12HP, 14HP, 16HP
THIS HIGH QUALITY MADE VALVE GUIDE ARE NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
THIS VALVE GUIDE WILL FIT EITHER INTAKE OR EXHAUST
REPLACES KOHLER PART NUMBER 235007-S

NOTE: AFTER INSTALATION YOU WILL PROBALLY NEED TO REAM THE VALVE GUIDE FOR THE VALVE TO FIT PROPERLY, REFER TO SERVICE MANUAL FOR INSTRUCTIONS AND PROPER TOOLS

POINTS, CONDENSER & SPARKPLUG KIT FITS KOHLER K181 K241 K301 K321 K341 K361 REPLACES KOHLER PART NUMBERS 47-150-03, 230722, H10 OR NGK B4L DEPENDING ON STOCK ON HAND
NOTE: THIS HIGH QUALITY REPLACEMENT KOHLER POINTS AND CONDENSER SET FITS BATTERY IGNITION ONLY KOHLER ENGINES. NEVER JUST REPLACE POINTS WITH OUT REPLACING THE CONDENSER, A BAD CONDENSER CAN CAUSE THE POINTS TO FAIL PREMATURLY
232535-S POINT COVER & GASKET 1 NEW CRANKSHAFT BEARING FITS KOHLER K241, K301, K321, K341, M10, M12, M14, M16 1 NEW BALANCE GEAR SPACER KIT 47-755-01-S FITS KOHLER K301 K321 K341 M12 M14 M16
NEW POINTS 47-150-03-S, CONDENSER 230722-S, 232535-S POINT COVER & 52-041-11-S GASKET FITS KOHLER K181 K241 K301 K321 K341 K361 K482 K532 K582 BATTERY IGNITION ONLY
NOTE: THIS IS A EXACT REPLACEMNT POINT COVER, POINTS, CONDENSER & POINT COVER GASKET, THAT IS NOT MADE IN CHINA, NICE HEAVY DUTY COVER WITH A FREE POINT COVER GASKET PART # 52-041-11-S 232535-2
1 NEW CRANKSHAFT BEARINGS ARE A HIGH QUALITY BEARING THAT WILL REPLACE KOHLER PART NUMBER A235376S, FITS KOHLER ENGINE MODELS K241, K301, K321, K341, M10, M12, M14, M16
THESE BEARINGS WILL MATCH YOUR KOHLER BEARING AND ARE THE SAME SPECS AND HIGH QUALITY AS THE OEM KOHLER BEARINGS AT THE FRACTION OF THE PRICE
1 K241, K301, K321, M10, M12, M14 REPLACES KOHLER PART # 47-755-01, 4775501, 47-155-01-S
NOTE: THESE HIGH QUALITY MADE BALNCE SHIM KIT IS NOT MADE IN TAIWAN OR CHINA
1 NEW VOLTAGE REGULATOR 25-755-03 -S FITS KOHLER K241 K301 K321 K341 K361 M16 1 NEW GOVENOR GEAR FITS KOHLER K241 K301 K321 K341 M10 M12 M14 M16 # A-235743-S COMPLETE GASKET SET WITH CRANK SEALS FITS K241 K301 K321 ENGINES # 47-755-08-S
1 NEW STATOR 237878-S FITS KOHLER K241 K301 K321 K341 K361 M10 M12 M14 M16 M18 M20 KT17 KT19 MV20 MV18 MV16 CH18 CH20 CH22 CH23 CH25 CH26 CV18 CV20 CV22 CV23 CV25 CV27 1 NEW GOVENOR GEAR FITS KOHLER K241 K301 K321 K341 M10 M12 M14 M16, KT17, M18, KT19, M20 MV18, MV16, MV20 # A-235743-S
NOTE: THIS IS A HIGH QUALITY MADE KOHLER GOVENOR GEAR, NOT MADE IN CHINA
IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 47-755-20-S
NOTE: THESE HIGH QUALITY MADE MAGNETO COIL IS NOT MADE IN CHINA
AIR FILTER & TUNE UP KIT FITS KOHLER K241 K301 K321 K181, M8 232535-S POINT COVER, POINTS & CONDENSER D-235327-S VALVE TAPPETS FITS KOHLER K301, K321, K341, K241, M10, M12, M14, M16
NEW AIR FILTER & PRE CLEANER FITS KOHLER K181, K241, K301, K321 THAT USE THIS AIR FILTER, POINTS, CONDENSER & SPARK PLUG
SHIPS FROM USA WITH A TRACKING NUMBER

Measurements on air filter: OD = 6" ID = 4 7/8" HEIGHT = 1 7/8"

 		NEW POINTS 47-150-03-S, CONDENSER 230722-S, 232535-S POINT COVER & 52-041-11-S GASKET FITS KOHLER K181 K241 K301 K321 K341 K361 K482 K532 K582 BATTERY IGNITION ONLY
NOTE: THIS IS A EXACT REPLACEMNT POINT COVER, POINTS, CONDENSER & POINT COVER GASKET, THAT IS NOT MADE IN CHINA, NICE HEAVY DUTY COVER WITH A FREE POINT COVER GASKET PART # 52-041-11-S 232535-2
 		D-235327-S VALVE TAPPETS {2} FITS KOHLER K301, K321, K341, K241, M10, M12, M14, M16
D-235327-S VALVE TAPPET FITS KOHLER K301, K321, K341, K241, M10, M12, M14, M16 2 NEW BALANCE GEAR SHAFT FITS KOHLER K241, K301, K321, K341 K361 PART # 236559-S KOHLER K301, K321, K341, K361, K241, M10, M12, M14, M16 BALANCE GEAR TIMING TOOL, NEW
D-235327-S VALVE TAPPETS {1} FITS KOHLER K301, K321, K341, K241, M10, M12, M14, M16 GOVENOR SPRINGS REPLACES KOHLER PART # 47-091-01-S, K281, K301, K321, K341, K361, M10, M12, M14, M16
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
PLEASE NOTE, NOT ALL OF THE KPHLER MODELS LISTED USED THIS GOVENOR SPRING, PLEASE CONFIRM PART 3 AND COMPARE THE PICTURE WITH YOUR OLD GOVENOR SPRING
 		A BRAND NEW ALUMINIUM DIE CAST TOOL FOR TIMING BALANCE GEARS ON KOHLER K301, K321, K341, K281, M10, M12, M14, M16 ENGINES THAT HAVE BALANCE GEARS, MADE IN USA, REPLACES KOHLER PART # Y-357 AND 25-455-06-S, NOTE THE ORIGINAL TOOL WAS MADE FROM PLASTIC AND WAS NOT AS DURABLE AS THIS ALUMINIUM DIECAST TOOL. MADE IN USA