You are here: Home > Parts & Tools > 4-Stroke Engines > Kohler > K Series > K321
Sort By:
Page of 2
1 POINTS COVER GROMMET FITS KOHLER K91 K161 K181 K241 K301 K321 K341 K361 K432 K532 K582 1 CAMSHAFT SHIM .010" FITS KOHLER K241, K301, K321, K341 K361 M10, M12, M14, M16 PART # 275067-S 1 CAMSHAFT SHIM .005" FITS KOHLER K241, K301, K321, K341 K361, M10, M12, M14, M16 PART # 275066-S
IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 47-755-20-S
NOTE: THESE HIGH QUALITY MADE MAGNETO COIL IS NOT MADE IN CHINA
 		GOVENOR SPRINGS REPLACES KOHLER PART # 235496-S, K281, K301, K321, K341, K361, M10, M12, M14, M16
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA

 		GOVENOR SPRINGS REPLACES KOHLER PART # 235496-S, K281, K301, K321, K341, K361, M10, M12, M14, M16
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA
NEW CARBURETOR MOUNTING GASKET SET FITS KOHLER K582 K532 K482 M18 M20 KT17 KT19 2 POINTS COVER GROMMET FITS KOHLER K91 K161 K181 K241 K301 K321 K341 K361 K432 K532 K582 1 NEW CYLINDER HEAD GASKET FITS KOHLER K241, K301, K321, M10, M12, M14 47-041-15


IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 47-755-20-S
NOTE: THESE HIGH QUALITY MADE MAGNETO COIL IS NOT MADE IN CHINA
 		1 NEW CYLINDER HEAD GASKET FITS KOHLER K241, K301, K321, M10, M12, M14 REPLACES KOHLER PART # 47-041-15, 4704115, 47-041-15-S
NOTE: THESE HIGH QUALITY MADE CYLINDER HEAD GASKET IS NOT MADE IN TAIWAN OR CHINA
CARBURETOR GASKET / SPACER FITS KOHLER CAST IRON K241, K341 ENGINES 47-049-01-S GOVENOR SPRINGS REPLACES KOHLER PART # 47-091-01-S, K281, K301, K321, K341, K361, M10, M12, M14, M16 GOVENOR SPRINGS REPLACES KOHLER PART # 235496-S, K281, K301, K321, K341, K361
A BRAND NEW GASKET & SPACER FIR KOHLER K SERIES 10-16HP, K281, K301, K321, K341,M10, M12, M14,M16, M18, M20, KT17, KT19 REPLACES KOHLER PART # 47-049-01-S, THIS ITEM IS NOT MADE IN CHINA

GOVENOR SPRINGS REPLACES KOHLER PART # 47-091-01-S, K281, K301, K321, K341, K361, M10, M12, M14, M16
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
PLEASE NOTE, NOT ALL OF THE KPHLER MODELS LISTED USED THIS GOVENOR SPRING, PLEASE CONFIRM PART 3 AND COMPARE THE PICTURE WITH YOUR OLD GOVENOR SPRING
 		GOVENOR SPRINGS REPLACES KOHLER PART # 235496-S, K281, K301, K321, K341, K361
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
PLEASE NOTE, NOT ALL OF THE KPHLER MODELS LISTED USED THIS GOVENOR SPRING, PLEASE CONFIRM PART 3 AND COMPARE THE PICTURE WITH YOUR OLD GOVENOR SPRING

AIR FILTER & PRE FILTER FITS KOHLER K241 K301 K321 K181, M8, 235116-S, NEW BREATHER HOSE FITS KOHLER K321, K341 ENGINES REPLACES PART # 47-326-01-S 1 NEW FUEL PUMP DIAPHRAGM FITS KOHLER K181 K241 K301 K321 K341 M10 M12 M14 M16
NEW AIR FILTER & PRE CLEANER FITS KOHLER K181, K241, K301, K321 THAT USE THIS AIR FILTER
SHIPS FROM USA WITH A TRACKING NUMBER

Measurements on air filter: OD = 6" ID = 4 7/8" HEIGHT = 1 7/8"

 		BREATHER HOSE 47-326-01-S, FITS KOHLER K241, K301, K321, K341 ENGINES, NEW
SHIPS FROM USA WITH A TRACKING NUMBER
THIS BREATHER TUBE IS NOT MADE IN TAIWAN OR CHINA
SHIPS PROUDLY FROM USA WITH A TRACKING NUMBER
THIS FUEL PUMP DIAPHRAGM IS FOR ALL METAL FUEL PUMPS THAT ARE USED ON KOHLER K91, K141, K161, K171, K181, K241, K301, K321, K341, K361, KT17, K19, K482, K532, K582, M8, M10, M12, M14, M16, M18, M20, MV16, MV18, MMV20
THE FUEL PUMP MOUNTING HOLES ARE 1 1/4" APART CENTER TO CENTEDIAPHRAGM IS 3 LAYERS, HAS FUEL PUMP RETURN SPRING & NEW FUEL PUMP GASKET
IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 4775520 POINTS & CONDENSER KIT FIT KOHLER K181 K241 K301 K321 K341. 47 150 03, 230722 2 VALVE GUIDES 235007-S FITS KOHLER K241 K301 K321 K341 K361 K432 K532 K582
IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 47-755-20-S
NOTE: THESE HIGH QUALITY MADE MAGNETO COIL IS NOT MADE IN CHINA
 		POINTS & CONDENSER KIT FIT KOHLER K181 K241 K301 K321 K341 K361, K482, K532, K582, REPLACES KOHLER PART NUMBERS 47-150-03, 230722
NOTE: THIS HIGH QUALITY REPLACEMENT KOHLER POINTS AND CONDENSER SET FITS BATTERY IGNITION ONLY KOHLER ENGINES. NEVER JUST REPLACE POINTS WITH OUT REPLACING THE CONDENSER, A BAD CONDENSER CAN CAUSE THE POINTS TO FAIL PREMATURLY
2 VALVE GUIDES FITS KOHLER K241, K301, K321, K341, M10, M12, M14, M16, 10HP, 12HP, 14HP, 16HP
THIS HIGH QUALITY MADE VALVE GUIDE ARE NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
THIS VALVE GUIDE WILL FIT EITHER INTAKE OR EXHAUST
REPLACES KOHLER PART NUMBER 235007-S

NOTE: AFTER INSTALATION YOU WILL PROBALLY NEED TO REAM THE VALVE GUIDE FOR THE VALVE TO FIT PROPERLY, REFER TO SERVICE MANUAL FOR INSTRUCTIONS AND PROPER TOOLS
NEW CARBURETOR MOUNTING GASKET SET WITH SCREWS FITS KOHLER K582 K532 K482 M18 M20 KT17 KT19 K241 K301, K321, K341, K361, M10, M12, M14, M16 POINTS & CONDENSER KIT WITH SPARK PLUG FIT KOHLER K181 K241 K301 K321 K341. 47 150 03, 230722 232535-S POINT COVER & GASKET


POINTS, CONDENSER & SPARKPLUG KIT FITS KOHLER K181 K241 K301 K321 K341 K361 REPLACES KOHLER PART NUMBERS 47-150-03, 230722, H10 OR NGK B4L DEPENDING ON STOCK ON HAND
NOTE: THIS HIGH QUALITY REPLACEMENT KOHLER POINTS AND CONDENSER SET FITS BATTERY IGNITION ONLY KOHLER ENGINES. NEVER JUST REPLACE POINTS WITH OUT REPLACING THE CONDENSER, A BAD CONDENSER CAN CAUSE THE POINTS TO FAIL PREMATURLY
NEW POINTS 47-150-03-S, CONDENSER 230722-S, 232535-S POINT COVER & 52-041-11-S GASKET FITS KOHLER K181 K241 K301 K321 K341 K361 K482 K532 K582 BATTERY IGNITION ONLY
NOTE: THIS IS A EXACT REPLACEMNT POINT COVER, POINTS, CONDENSER & POINT COVER GASKET, THAT IS NOT MADE IN CHINA, NICE HEAVY DUTY COVER WITH A FREE POINT COVER GASKET PART # 52-041-11-S 232535-2
1 NEW CRANKSHAFT BEARING FITS KOHLER K241, K301, K321, K341, M10, M12, M14, M16 1 NEW BALANCE GEAR SPACER KIT 47-755-01-S FITS KOHLER K301 K321 K341 M12 M14 M16 1 NEW VOLTAGE REGULATOR 25-755-03 -S FITS KOHLER K241 K301 K321 K341 K361 M16
1 NEW CRANKSHAFT BEARINGS ARE A HIGH QUALITY BEARING THAT WILL REPLACE KOHLER PART NUMBER A235376S, FITS KOHLER ENGINE MODELS K241, K301, K321, K341, M10, M12, M14, M16
THESE BEARINGS WILL MATCH YOUR KOHLER BEARING AND ARE THE SAME SPECS AND HIGH QUALITY AS THE OEM KOHLER BEARINGS AT THE FRACTION OF THE PRICE
1 K241, K301, K321, M10, M12, M14 REPLACES KOHLER PART # 47-755-01, 4775501, 47-155-01-S
NOTE: THESE HIGH QUALITY MADE BALNCE SHIM KIT IS NOT MADE IN TAIWAN OR CHINA
1 NEW STATOR 237878-S FITS KOHLER K241 K301 K321 K341 K361 M10 M12 M14 M16 M18 M20 KT17 KT19 MV20 MV18 MV16 CH18 CH20 CH22 CH23 CH25 CH26 CV18 CV20 CV22 CV23 CV25 CV27
1 NEW GOVENOR GEAR FITS KOHLER K241 K301 K321 K341 M10 M12 M14 M16 # A-235743-S COMPLETE GASKET SET WITH CRANK SEALS FITS K241 K301 K321 ENGINES # 47-755-08-S NEW STANDARD CONNECTING ROD FITS KOHLER K 321, M14 12HP PART # 45-067-09-S
1 NEW GOVENOR GEAR FITS KOHLER K241 K301 K321 K341 M10 M12 M14 M16, KT17, M18, KT19, M20 MV18, MV16, MV20 # A-235743-S
NOTE: THIS IS A HIGH QUALITY MADE KOHLER GOVENOR GEAR, NOT MADE IN CHINA
IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 47-755-20-S
NOTE: THESE HIGH QUALITY MADE MAGNETO COIL IS NOT MADE IN CHINA
 		NEW CONNECTING ROD FITS KOHLER K 301 12HP, K321 14HP KOHLER PART # 45-067-09-S

THIS IS FOR STANDARD CRANK PIN THAT MEASURES 1.50"
AIR FILTER & TUNE UP KIT FITS KOHLER K241 K301 K321 K181, M8 232535-S POINT COVER, POINTS & CONDENSER NEW .010" UNDERSIZED CONNECTING ROD FITS KOHLER K301 12HP, K321 14HP # 4506710S
NEW AIR FILTER & PRE CLEANER FITS KOHLER K181, K241, K301, K321 THAT USE THIS AIR FILTER, POINTS, CONDENSER & SPARK PLUG
SHIPS FROM USA WITH A TRACKING NUMBER

Measurements on air filter: OD = 6" ID = 4 7/8" HEIGHT = 1 7/8"

 		NEW POINTS 47-150-03-S, CONDENSER 230722-S, 232535-S POINT COVER & 52-041-11-S GASKET FITS KOHLER K181 K241 K301 K321 K341 K361 K482 K532 K582 BATTERY IGNITION ONLY
NOTE: THIS IS A EXACT REPLACEMNT POINT COVER, POINTS, CONDENSER & POINT COVER GASKET, THAT IS NOT MADE IN CHINA, NICE HEAVY DUTY COVER WITH A FREE POINT COVER GASKET PART # 52-041-11-S 232535-2
 		NEW CONNECTING ROD FITS KOHLER K 301 12HP, K321 14HP KOHLER PART # 45-067-09-S

THIS IS FOR .010" UNDERSIZED CRANK PIN THAT MEASURES 1.40"
STANDARD CHROME MAHLE PISTON RINGS FITS KOHLER M14 K321 PART # 47-108-05-S COMPLETE GASKET SET WITH CRANK SEALS FITS M10, M12, M14 ENGINES # 47-755-27-S D-235327-S VALVE TAPPETS FITS KOHLER K301, K321, K341, K241, M10, M12, M14, M16
NEW STANDARD CHROME MAHLE PISTON RINGS FITS KOHLER M14 K321 PART # 47-105-05-S
SHIPS FROM USA WITH A TRACKING NUMBER
NOT MADE IN CHINA

TORQUE ON CONNECTING ROD 260 INCH POUNDS
CYLINDER HEAD BOLTS 25-30 FOOT POUNDS
OIL PAN AND CLOSURE PLATE 35 FOOT POUNDS
VALVE ADJUSTMENT
INTAKE VALVE .010"
EXHAUST VALVE .019"
POINTS GAP .020"
NOTE: PROPER CONNECTING ROD INSTALLATION IS HOLE IN CONNECTING ROD CAP FACES THE CAMSHAFT.

14HP KOHLER BORE SPECS:
3.500" STANDARD
3.510" .010" OVERSIZE
3.520" .020" OVERSIZE
3.530" .030" OVERSIZE
3.540" .040" OVERSIZE

CONNECTING ROD SPECS:
1.500" STANDARD
1.490" .010" UNDERSIZE
1.480" .020" UNDERSIZE

NOTE: IF CYLINDER IS MORE THEN .003" TAPER IT WILL NEED TO BE REBORED AS INSTALLING NEW PISTON AND RINGS IN A TAPER BORE THEY WILL PROBABLY CAUSE THE ENGINE TO SMOKE & BURN OIL.
KOHLER RECOMMENDS AFTER HONING & OR REBORING THAT THE CYLINDER BE WASHED IN HOT SOAPY WATER TO ENSURE ARE GRIT FROM MACHINING IS REMOVED BEFORE THE NEW PARTS ARE INSTALLED IN THE ENGINE.
COMPLETE GASKET SET WITH CRANK SEALS FITS M10, M12, M14 10HP, 12HP, 14HP ENGINES, PART # 45-755-27-S, 22 PIECE SET
THIS HIGH QUALITY MADE GASKET SET IS NOT MADE IN CHINA, COMES WITH A METAL HEAD GASKET
SHIPS FROM USA WITH A TRACKING NUMBER
NOTE: THE SHIM GASKETS ARE CORRECT FOR A MAGNUM SERIES 10HP 12HP & 14HP KOHLER ENGINES, MOST OTHER GASKET SETS HAVE THE WRONG SHIP GASKETS AND THEY WILL LEAK OIL AS THEY ARE NOT DESIGNED CORECTLY FOR YOU KOHLER MAGNUM ENGINE

D-235327-S VALVE TAPPETS {2} FITS KOHLER K301, K321, K341, K241, M10, M12, M14, M16