You are here: Home > Parts & Tools > 4-Stroke Engines > Kohler > Magnum Series > M12
Sort By:
Page of 2
1 CAMSHAFT SHIM .010" FITS KOHLER K241, K301, K321, K341 K361 M10, M12, M14, M16 PART # 275067-S 1 CAMSHAFT SHIM .005" FITS KOHLER K241, K301, K321, K341 K361, M10, M12, M14, M16 PART # 275066-S NEW CARBURETOR MOUNTING GASKET SET FITS KOHLER K582 K532 K482 M18 M20 KT17 KT19
GOVENOR SPRINGS REPLACES KOHLER PART # 235496-S, K281, K301, K321, K341, K361, M10, M12, M14, M16
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA

 		GOVENOR SPRINGS REPLACES KOHLER PART # 235496-S, K281, K301, K321, K341, K361, M10, M12, M14, M16
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA

1 NEW CYLINDER HEAD GASKET FITS KOHLER K241, K301, K321, M10, M12, M14 47-041-15 KOHLER OEM 235603-S THROTTLE / CHOKE CABLE SPEED CLIP CARBURETOR GASKET / SPACER FITS KOHLER CAST IRON K241, K341 ENGINES 47-049-01-S
1 NEW CYLINDER HEAD GASKET FITS KOHLER K241, K301, K321, M10, M12, M14 REPLACES KOHLER PART # 47-041-15, 4704115, 47-041-15-S
NOTE: THESE HIGH QUALITY MADE CYLINDER HEAD GASKET IS NOT MADE IN TAIWAN OR CHINA
IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 47-755-20-S
NOTE: THESE HIGH QUALITY MADE MAGNETO COIL IS NOT MADE IN CHINA
 		A BRAND NEW GASKET & SPACER FIR KOHLER K SERIES 10-16HP, K281, K301, K321, K341,M10, M12, M14,M16, M18, M20, KT17, KT19 REPLACES KOHLER PART # 47-049-01-S, THIS ITEM IS NOT MADE IN CHINA

GOVENOR SPRINGS REPLACES KOHLER PART # 47-091-01-S, K281, K301, K321, K341, K361, M10, M12, M14, M16 GOVENOR SPRINGS REPLACES KOHLER PART # 235496-S, K281, K301, K321, K341, K361 NEW BREATHER HOSE FITS KOHLER K321, K341 ENGINES REPLACES PART # 47-326-01-S
GOVENOR SPRINGS REPLACES KOHLER PART # 47-091-01-S, K281, K301, K321, K341, K361, M10, M12, M14, M16
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
PLEASE NOTE, NOT ALL OF THE KPHLER MODELS LISTED USED THIS GOVENOR SPRING, PLEASE CONFIRM PART 3 AND COMPARE THE PICTURE WITH YOUR OLD GOVENOR SPRING
 		GOVENOR SPRINGS REPLACES KOHLER PART # 235496-S, K281, K301, K321, K341, K361
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
PLEASE NOTE, NOT ALL OF THE KPHLER MODELS LISTED USED THIS GOVENOR SPRING, PLEASE CONFIRM PART 3 AND COMPARE THE PICTURE WITH YOUR OLD GOVENOR SPRING

BREATHER HOSE 47-326-01-S, FITS KOHLER K241, K301, K321, K341 ENGINES, NEW
SHIPS FROM USA WITH A TRACKING NUMBER
THIS BREATHER TUBE IS NOT MADE IN TAIWAN OR CHINA
SHIPS PROUDLY FROM USA WITH A TRACKING NUMBER
1 NEW FUEL PUMP DIAPHRAGM FITS KOHLER K181 K241 K301 K321 K341 M10 M12 M14 M16 NEW CARBURETOR MOUNTING GASKET SET WITH SCREWS FITS KOHLER K582 K532 K482 M18 M20 KT17 KT19 K241 K301, K321, K341, K361, M10, M12, M14, M16 1 NEW CRANKSHAFT BEARING FITS KOHLER K241, K301, K321, K341, M10, M12, M14, M16
THIS FUEL PUMP DIAPHRAGM IS FOR ALL METAL FUEL PUMPS THAT ARE USED ON KOHLER K91, K141, K161, K171, K181, K241, K301, K321, K341, K361, KT17, K19, K482, K532, K582, M8, M10, M12, M14, M16, M18, M20, MV16, MV18, MMV20
THE FUEL PUMP MOUNTING HOLES ARE 1 1/4" APART CENTER TO CENTEDIAPHRAGM IS 3 LAYERS, HAS FUEL PUMP RETURN SPRING & NEW FUEL PUMP GASKET


1 NEW CRANKSHAFT BEARINGS ARE A HIGH QUALITY BEARING THAT WILL REPLACE KOHLER PART NUMBER A235376S, FITS KOHLER ENGINE MODELS K241, K301, K321, K341, M10, M12, M14, M16
THESE BEARINGS WILL MATCH YOUR KOHLER BEARING AND ARE THE SAME SPECS AND HIGH QUALITY AS THE OEM KOHLER BEARINGS AT THE FRACTION OF THE PRICE
1 NEW BALANCE GEAR SPACER KIT 47-755-01-S FITS KOHLER K301 K321 K341 M12 M14 M16 1 NEW VOLTAGE REGULATOR 25-755-03 -S FITS KOHLER K241 K301 K321 K341 K361 M16 1 NEW GOVENOR GEAR FITS KOHLER K241 K301 K321 K341 M10 M12 M14 M16 # A-235743-S
1 K241, K301, K321, M10, M12, M14 REPLACES KOHLER PART # 47-755-01, 4775501, 47-155-01-S
NOTE: THESE HIGH QUALITY MADE BALNCE SHIM KIT IS NOT MADE IN TAIWAN OR CHINA
1 NEW STATOR 237878-S FITS KOHLER K241 K301 K321 K341 K361 M10 M12 M14 M16 M18 M20 KT17 KT19 MV20 MV18 MV16 CH18 CH20 CH22 CH23 CH25 CH26 CV18 CV20 CV22 CV23 CV25 CV27 1 NEW GOVENOR GEAR FITS KOHLER K241 K301 K321 K341 M10 M12 M14 M16, KT17, M18, KT19, M20 MV18, MV16, MV20 # A-235743-S
NOTE: THIS IS A HIGH QUALITY MADE KOHLER GOVENOR GEAR, NOT MADE IN CHINA
NEW STANDARD CONNECTING ROD FITS KOHLER K 321, M14 12HP PART # 45-067-09-S NEW .010" UNDERSIZED CONNECTING ROD FITS KOHLER K301 12HP, K321 14HP # 4506710S D-235327-S VALVE TAPPETS FITS KOHLER K301, K321, K341, K241, M10, M12, M14, M16
NEW CONNECTING ROD FITS KOHLER K 301 12HP, K321 14HP KOHLER PART # 45-067-09-S

THIS IS FOR STANDARD CRANK PIN THAT MEASURES 1.50"
 		NEW CONNECTING ROD FITS KOHLER K 301 12HP, K321 14HP KOHLER PART # 45-067-09-S

THIS IS FOR .010" UNDERSIZED CRANK PIN THAT MEASURES 1.40"
 		D-235327-S VALVE TAPPETS {2} FITS KOHLER K301, K321, K341, K241, M10, M12, M14, M16
D-235327-S VALVE TAPPET FITS KOHLER K301, K321, K341, K241, M10, M12, M14, M16 2 NEW BALANCE GEAR SHAFT FITS KOHLER K241, K301, K321, K341 K361 PART # 236559-S KOHLER K301, K321, K341, K361, K241, M10, M12, M14, M16 BALANCE GEAR TIMING TOOL, NEW
D-235327-S VALVE TAPPETS {1} FITS KOHLER K301, K321, K341, K241, M10, M12, M14, M16 GOVENOR SPRINGS REPLACES KOHLER PART # 47-091-01-S, K281, K301, K321, K341, K361, M10, M12, M14, M16
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
PLEASE NOTE, NOT ALL OF THE KPHLER MODELS LISTED USED THIS GOVENOR SPRING, PLEASE CONFIRM PART 3 AND COMPARE THE PICTURE WITH YOUR OLD GOVENOR SPRING
 		A BRAND NEW ALUMINIUM DIE CAST TOOL FOR TIMING BALANCE GEARS ON KOHLER K301, K321, K341, K281, M10, M12, M14, M16 ENGINES THAT HAVE BALANCE GEARS, MADE IN USA, REPLACES KOHLER PART # Y-357 AND 25-455-06-S, NOTE THE ORIGINAL TOOL WAS MADE FROM PLASTIC AND WAS NOT AS DURABLE AS THIS ALUMINIUM DIECAST TOOL. MADE IN USA
NEW .020" UNDERSIZED CONNECTING ROD FITS KOHLER K301 12HP, K321 14HP SHIPS USA 2 NEW CRANKSHAFT BEARING FITS KOHLER K241, K301, K321, K341, M10, M12, M14, M16 NEW STANDARD PISTON KIT FITS KOHLER K301, M12, 12HP ENGINES PART # 47-874-06-S
NEW CONNECTING ROD FITS KOHLER K 301 12HP, K321 14HP KOHLER PART # 45-067-09-S

THIS IS FOR .020" UNDERSIZED CRANK PIN THAT MEASURES 1.30"
2 NEW CRANKSHAFT BEARINGS ARE A HIGH QUALITY BEARING THAT WILL REPLACE KOHLER PART NUMBER A235376S, FITS KOHLER ENGINE MODELS K241, K301, K321, K341, M10, M12, M14, M16
THESE BEARINGS WILL MATCH YOUR KOHLER BEARING AND ARE THE SAME SPECS AND HIGH QUALITY AS THE OEM KOHLER BEARINGS AT THE FRACTION OF THE PRICE
NEW STANDARD PISTON KIT FITS KOHLER K301, 12HP, CAST IRON BLOCK
REPLACES PART # 47-874-06-S
NOTE: THIS PISTON KIT IS NOT MADE IN TAIWAN OR CHINA, HIGH QUALITY

All K301 engines, such as K301A, K301S, K301AS, K301AQS and so on no matter what the suffix is.
SPECS FOR MACHINE SHOP TO BORE CYLINDER: WE RECOMMEND THAT YOU TAKE YOUR PISTON TO THE MACHINE SHOP SO THEY CAN MEASURE AND BORE CORRECTLY

12 HP STANDARD Cylinder Bore 3.375"
+.010" 3.385"
+.020" 3.395"
+.030" 3.405"
+.040" 3.415"
NEW .010" UNDERSIZED PISTON KIT FITS KOHLER K301, M12, 12HP ENGINES PART # 47-874-08-S NEW .020" UNDERSIZED PISTON KIT FITS KOHLER K301, M12, 12HP ENGINES PART # 47-874-09-S NEW .030" UNDERSIZED PISTON KIT FITS KOHLER K301, M12, 12HP ENGINES PART # 47-874-10-S
NEW .010" UNDERSIZED PISTON KIT FITS KOHLER K301, 12HP, CAST IRON BLOCK
REPLACES PART # 47-874-08-S
NOTE: THIS PISTON KIT IS NOT MADE IN TAIWAN OR CHINA, HIGH QUALITY

All K301 engines, such as K301A, K301S, K301AS, K301AQS and so on no matter what the suffix is.
SPECS FOR MACHINE SHOP TO BORE CYLINDER: WE RECOMMEND THAT YOU TAKE YOUR PISTON TO THE MACHINE SHOP SO THEY CAN MEASURE AND BORE CORRECTLY

12 HP STANDARD Cylinder Bore 3.375"
+.010" 3.385"
+.020" 3.395"
+.030" 3.405"
+.040" 3.415"
NEW .020" UNDERSIZED PISTON KIT FITS KOHLER K301, 12HP, CAST IRON BLOCK
REPLACES PART # 47-874-09-S
NOTE: THIS PISTON KIT IS NOT MADE IN TAIWAN OR CHINA, HIGH QUALITY

All K301 engines, such as K301A, K301S, K301AS, K301AQS and so on no matter what the suffix is.
SPECS FOR MACHINE SHOP TO BORE CYLINDER: WE RECOMMEND THAT YOU TAKE YOUR PISTON TO THE MACHINE SHOP SO THEY CAN MEASURE AND BORE CORRECTLY

12 HP STANDARD Cylinder Bore 3.375"
+.010" 3.385"
+.020" 3.395"
+.030" 3.405"
+.040" 3.415"
NEW .030" UNDERSIZED PISTON KIT FITS KOHLER K301, 12HP, CAST IRON BLOCK
K301-PISTON-KIT-.030-OVERSIZE
NOTE: THIS PISTON KIT IS NOT MADE IN TAIWAN OR CHINA, HIGH QUALITY

All K301 engines, such as K301A, K301S, K301AS, K301AQS and so on no matter what the suffix is.
SPECS FOR MACHINE SHOP TO BORE CYLINDER: WE RECOMMEND THAT YOU TAKE YOUR PISTON TO THE MACHINE SHOP SO THEY CAN MEASURE AND BORE CORRECTLY

12 HP STANDARD Cylinder Bore 3.375"
+.010" 3.385"
+.020" 3.395"
+.030" 3.405"
+.040" 3.415"
NEW .040" UNDERSIZED PISTON KIT FITS KOHLER K301, M12, 12HP ENGINES KOHLER OEM A-235256-S KIT GOVENOR SHAFT USA MADE & SHIPPED 1 NEW STATOR 237878-S FITS KOHLER K241 K301 K321 K341 K361 M10 M12 M14 M16 M18
NEW .040" UNDERSIZED PISTON KIT FITS KOHLER K301, 12HP, CAST IRON BLOCK
NOTE: THIS PISTON KIT IS NOT MADE IN TAIWAN OR CHINA, HIGH QUALITY

All K301 engines, such as K301A, K301S, K301AS, K301AQS and so on no matter what the suffix is.
SPECS FOR MACHINE SHOP TO BORE CYLINDER: WE RECOMMEND THAT YOU TAKE YOUR PISTON TO THE MACHINE SHOP SO THEY CAN MEASURE AND BORE CORRECTLY

12 HP STANDARD Cylinder Bore 3.375"
+.010" 3.385"
+.020" 3.395"
+.030" 3.405"
+.040" 3.415"
KOHLER OEM A-235256-S KIT GOVENOR SHAFT USA MADE & SHIPPED 1 NEW STATOR 237878-S FITS KOHLER K241 K301 K321 K341 K361 M10 M12 M14 M16 M18 M20 KT17 KT19 MV20 MV18 MV16 CH18 CH20 CH22 CH23 CH25 CH26 CV18 CV20 CV22 CV23 CV25 CV27